|
ES70 system window
1. Huajian profile 2. Combination angle glue injection process 3. Micro ventilation system 4. High cost performance 5. Stepped drainage 6. Type C heat insulation plaster design 7. Mullion workmanship
|
1. Notch standardization: fitting notch, line pressing notch, duct corner notch, rubber strip notch, installation notch and sealing notch.
2. The stepped drainage averts the rainwater flowing to the indoor direction.
3. The Type C heat insulation plaster improves the heat-insulating property, and becomes an important constituent part of stepped drainage.
4. The outdoor profile diversion trench design is good for timely discharge of rainwater.
5. Moisture separation isobaric rubber strip, separated external watertight chamber and indoor air-tight chamber.
6. The die-casting duct corner meets the corner connection requirements at different angles; The surrounding gluing process strengthens the corner connection.
Material: 6063-T5 primary aluminum
Wall thickness: 1.5mm
Glass: Double glass 5+9A+4+9A+5
Hardware: Customization of special hardware for Siegenia Great Wall Series
Rubber strip: Automotive ternary ethylene propylene rubber strip
1. Huajian profile 2. Combination angle glue injection process 3. Micro ventilation system
4. High cost performance 5. Stepped drainage 6. Type C heat insulation plaster design
7. Mullion workmanship
